SHT5000-P single space side-action grip

SHT5000-P single space side-action grip

This series of servo-hydraulic universal testing machine is designed with up-mounted actuator structure. Bidirectional differential cylinder provides bidirectional control of tension and compression in one single space. Advanced side action hydraulic tensile grips provide high gripping performance for high strength and high hardness materials without any initial gripping force. Clearance-free structure and actuator up and down to adjust the test space offers easy operation and high efficiency. This machine is mainly used for tensile test of metallic materials. It provides closed loop control of constant force, constant displacement and constant extension, smoothly switching among them. Test results can be automatically calculated and be able to printed and exported.

HUT-D single space wedge-action grip

HUT-D single space wedge-action grip

HUT series type D servo-hydraulic universal testing machine is designed with up-mounted actuator structure. Bidirectional differential cylinder provides bidirectional control of tension and compression in one single space. Clearance-free structure and actuator up and down to adjust the test space offers easy operation and high efficiency. This machine is mainly used for tensile test of metallic materials. It provides closed loop control of constant force, constant displacement and constant extension, smoothly switching among them. Test results can be automatically calculated and be able to printed and exported. Load Frame Configuration: 4 columns, servo-controlled hydraulic Capacity: 600kN, 1000kN, 2000kN Test Space: Single zone Typical specimens: Fasteners, rebar, chain, welds, castings

Rebar coupler cyclic testing machine

Rebar coupler cyclic testing machine

AC133 ACCEPTANCE CRITERIA FOR MECHANICAL CONNECTOR SYSTEMS FOR STEEL REINFORCING BARS Purpose: The purpose of this acceptance criteria is to establish requirements for mechanical connector systems for steel reinforcing bars to be recognized in an ICC Evaluation Service, LLC (ICC-ES), evaluation report under the 2012 and 2009 International Building Code® (IBC) and the 2012 and 2009 International Residential Code® (IRC). The bases of recognition are IBC Section 104.11 and IRC Section R104.11. The reason for development of this criteria is to establish guidelines for the evaluation of mechanical connector systems for steel reinforcing bars and to provide additional information to clarify the requirements of the IBC, and IRC, and documents referenced by those codes. WANCE sevvo-hydraulic universal testing machine HUT-DP type is designed with side action grip which enable tension and compression cyclic test, complying with AC133 test requirements.

HUT-A dual space wedge action grip

HUT-A dual space wedge action grip

Load Frame Configuration: 4 or 6 column, servo-controlled hydraulic Capacity: 200kN, 300kN, 500kN, 600kN, 1000kN, 2000kN Test Space: Dual zone (tension on top, compression on bottom) Typical specimens: Fasteners, rebar, chain, welds, castings